Counter-Top ET101
Counter-Top ET101

6.200.000 VNĐ

Counter-Top ET101
  • Simple design, easy to install
  • No electricity, no waste of water
  • Integrated 3 flexible water mode

OPTIMAL SOLUTION

 

ET101 is a water filter installed on a high-quality sink of Mitsubishi Cleansui. The filtered water meets all the requirements of QCVN6-1 / 2010 BYT for direct drinking at the tap.

 

This will be an indispensable device in the kitchen ET101 will always accompany to bring clean mineral water to your family.

FIBER FILTING TECHNOLOGY

The filter is compactly designed with 4 powerful filter levels, ensuring the filtered water meets the direct drinking standard and retains beneficial minerals.

EUC2000 filter compact size, integrated 4 levels of continuous filtration, powerful filtering capabilities.

1, Nonwoven mesh layer

Filter coarse, remove the dirt and impurities in the water.

2, Ion exchange fiber layer

Eliminate dissolved lead mixed with water

3, Activated carbon layer 

Removes toxic impurities, plant drugs, deodorizing mold, chlorinating in water and some other impurities such as Bromoform / Trihalomethanes / Chlorine / Chloroform 1,1,1 / Trichlorethylene / Bromodichloromethane …

4, Hollow-fiber filter layer

Water is absorbed from the outside of the tube wall of the hollow fibers including millions of filter holes with the size of 0.01 – 0.1 micron from the inside. Impurities larger than 0.1 μm such as algae, microorganisms, bacteria, rust, mold, and heavy metals in the water will be filtered out, leaving only clean water and beneficial minerals.

Product advantages

Hollow fiber filter technology

Ultra-fine filter eye size 0.01 µm - 0.1 µm, helps to filter out impurities, microorganisms and plastic particles.

Simple design, easy to install

Diverse connection kit, easy to connect with common faucet types

Flexible water regime

Multi-function valve helps integrate 3 water modes without worrying about clogging

No electricity, no waste of water

Non-electric filter without electricity, high filtration efficiency, stable flow.

Product's name

Mitsubishi Cleansui ET101

Mounting position

On the sink

Function

Raw mineral water

Permissible water temperature

Below 35 degrees Celsius

Supply water quality

Tap water for living

Rated water flow

3 liters/ min

Filter capacity

8000 liters

Suitable water pressure

0.07 - 0.35MPa

Filter size (LxW)

156 x 263 mm

Mass

0.8kg (1.4kg when full of water)

Expiration date

12 months (20 liters/ day)

International and Vietnamese testing standards

JIS S 3201/ ISO 9001-14001

QCVN 6-1: 2010/ BYT

QCVN 01: 2009/ BYT

Warranty period

01 year (body, hose, connecting cord)

6 months (filter)

Origin

100% Japan

Unlike large, bulky water filters, ET101 is installed right on the sink. This is a device that is able to connect directly to many popular types of nozzles.

With 3 flexible water modes, the device is suitable for many different uses. Especially, the filter tap and the unfiltered water separately will limit confusion.

frequently asked Questions

Group of questions about installation

What types of taps are incompatible with the product?

Although suitable for most common types of hose in the Vietnamese market, there are still some types of faucets that are incompatible with Cleansui ET 101. Specifically, the type of faucet has a nozzle diameter smaller than 13 mm or large. more than 24mm; faucet with a shower mouth; faucet mouth rectangular or oval; nozzle with sensor.

Should I connect the filter hose to the water heater heater?

As recommended by the manufacturer, you should not connect the filter hose to the water heater heater end. High temperatures will damage the device. Also, pay attention to the installation of the device, do not place near heat sources, if you do not want to leak water.

When should I change the filter, does the machine show any specific message?

The manufacturer recommends that you replace the filter after 12 months of use. However, sometimes due to the quality of the incoming water, the duration of use, the water pressure may change over time. At this time, the core replacement will be done when the water flow is significantly reduced, when the valve opening is full but the filtration speed is still slow, the water after filtration has cloudy or chlorine smell. These are indications that the activated carbon layer has reduced adsorption capacity.
Viewed products
Why choose a product of
mitsubishi cleansui
Made in Japan 100%
Delivery and Installation at place
Professional service
You have 0 products in your cart
Product's name Amount Price

Total:

(VAT included)

0VND
Continue shopping

Code

(Processing)
Code:1738HN754 Order date:20 / 06 / 2019

THIẾT BỊ LỌC NƯỚC LẮP TẠI VÒI

EU201

1 x 2.450.000VND
Discount code N/A
Shipping Free

Total 7.350.000VND

Delivery address

Nguyễn Văn A
Số 1 Lương Yên
Quận Hai Bà Trưng, Hà Nội
090 123 4567
username@hotmail.com

Delivery method

Standard delivery
trong vòng 3 - 9 ngày làm việc

Miễn phí

Payment methods

Credit / debit card
có các chữ số cuối là **45

Nhận báo giá