Ultra-fine filter eye size 0.01 µm - 0.1 µm, helps to filter out impurities, microorganisms and plastic particles.
Counter-Top
ET101
Counter-Top
ET101
6.500.000 VNĐ
Counter-Top ET101- Simple design, easy to install
- No electricity, no waste of water
- Integrated 3 flexible water mode
OPTIMAL SOLUTION
ET101 is a water filter installed on a high-quality sink of Mitsubishi Cleansui. The filtered water meets all the requirements of QCVN6-1 / 2010 BYT for direct drinking at the tap.
This will be an indispensable device in the kitchen ET101 will always accompany to bring clean mineral water to your family.
FIBER FILTING TECHNOLOGY
The filter is compactly designed with 4 powerful filter levels, ensuring the filtered water meets the direct drinking standard and retains beneficial minerals.
EUC2000 filter compact size, integrated 4 levels of continuous filtration, powerful filtering capabilities.
1, Nonwoven mesh layer
Filter coarse, remove the dirt and impurities in the water.
2, Ion exchange fiber layer
Eliminate dissolved lead mixed with water
3, Activated carbon layer
Removes toxic impurities, plant drugs, deodorizing mold, chlorinating in water and some other impurities such as Bromoform / Trihalomethanes / Chlorine / Chloroform 1,1,1 / Trichlorethylene / Bromodichloromethane …
4, Hollow-fiber filter layer
Water is absorbed from the outside of the tube wall of the hollow fibers including millions of filter holes with the size of 0.01 – 0.1 micron from the inside. Impurities larger than 0.1 μm such as algae, microorganisms, bacteria, rust, mold, and heavy metals in the water will be filtered out, leaving only clean water and beneficial minerals.
Product advantages
Hollow fiber filter technology
Simple design, easy to install
Diverse connection kit, easy to connect with common faucet types
Flexible water regime
Multi-function valve helps integrate 3 water modes without worrying about clogging
No electricity, no waste of water
Non-electric filter without electricity, high filtration efficiency, stable flow.
Product's name
Mitsubishi Cleansui ET101
Mounting position
On the sink
Function
Raw mineral water
Permissible water temperature
Below 35 degrees Celsius
Supply water quality
Tap water for living
Rated water flow
3 liters/ min
Filter capacity
8000 liters
Suitable water pressure
0.07 - 0.35MPa
Filter size (LxW)
156 x 263 mm
Mass
0.8kg (1.4kg when full of water)
Expiration date
12 months (20 liters/ day)
International and Vietnamese testing standards
JIS S 3201/ ISO 9001-14001
QCVN 6-1: 2010/ BYT
QCVN 01: 2009/ BYT
Warranty period
01 year (body, hose, connecting cord)
6 months (filter)
Origin
100% Japan
Unlike large, bulky water filters, ET101 is installed right on the sink. This is a device that is able to connect directly to many popular types of nozzles.
With 3 flexible water modes, the device is suitable for many different uses. Especially, the filter tap and the unfiltered water separately will limit confusion.
frequently asked Questions
Group of questions about installation
What types of taps are incompatible with the product?
Although suitable for most common types of hose in the Vietnamese market, there are still some types of faucets that are incompatible with Cleansui ET 101. Specifically, the type of faucet has a nozzle diameter smaller than 13 mm or large. more than 24mm; faucet with a shower mouth; faucet mouth rectangular or oval; nozzle with sensor.
Should I connect the filter hose to the water heater heater?
As recommended by the manufacturer, you should not connect the filter hose to the water heater heater end. High temperatures will damage the device. Also, pay attention to the installation of the device, do not place near heat sources, if you do not want to leak water.
When should I change the filter, does the machine show any specific message?
The manufacturer recommends that you replace the filter after 12 months of use. However, sometimes due to the quality of the incoming water, the duration of use, the water pressure may change over time.At this time, the core replacement will be done when the water flow is significantly reduced, when the valve opening is full but the filtration speed is still slow, the water after filtration has cloudy or chlorine smell. These are indications that the activated carbon layer has reduced adsorption capacity.
Viewed products
Why choose a product of
mitsubishi cleansui
mitsubishi cleansui
Made in Japan 100%
Delivery and Installation at place
Professional service
